Reasons Why Site Surveys Are Vital When Specifying Uninterrupted Power Supplies
In the case of facility managers, never was there a time when it’s so vital to be able to guarantee uninterrupted power. If your goal is to conduct a successful UPS installation, it’s important that during the early stages of specification process, you conduct a site survey. For the sake of future business continuity, this task is also necessary. After you’re done reading this article, you’ll know more about site surveys, giving you more wisdom the next time you visit a surveying supply store.
When you’re dealing with 5kVA or more, a good surveying supply store will typically say you need a site survey. In these installations, most sites will need a lot of planning in terms of aftercare, the environment, remote monitoring, electrical installation, floor loadings, logistics, method statements and health and safety risk assessments. In cases dealing with less than 5kVA, surveys are usually not conducted but exceptions may apply — such as when specific installation issues come into play, like issues related to long runtime battery packs.
To achieve a successful UPS selection, site survey is a must. If you’re working with a facilities team that wants to achieve optimum business continuity, put site surveys into play as early as the pre-sale stage. This stage is vital because this is the time to talk about uninterruptible power supply installation with the technical energy consultant (TEC) of the manufacturer. Bear in mind that trust and communication must be set in place early on if you want to create a wonderful working relationship.
A vital component of UPS specification involves the ability to identify critical, essential and non-essential loads. Expect your experience at the surveying supplies store to be more pleasant if you can achieve this. Drawing on both site and theoretical data can make this task a complex one. Take note that there are vital differences between power ratings listed in operating manuals and those located on rear panel labels. It’s due to this reason that knowing actual load ratings involves measuring information located on the local distribution panel. It will be very challenging to get this particular kind of assessment when surveying a site isn’t done, and also if you lack expert uninterrupted power knowledge.
In the same fashion, Power over Ethernet (PoE) applications typically require upgraded capacity. Network managers need a good overview of equipment and applications, and this is all the more true because the criticality of certain applications dictates the degree of protection required. During the stage of conducting a sight survey, a comprehensive overview of the particular network can establish this while furthermore highlighting the steps in departmentalising.
Do you know how many other departments will be able to use uninterrupted power in the event that, for instance, one component is shut down?
The good news is that designing, installing and operating UPS can be easy.